LR03 User Manual
Power On/Off
Plug into a grounded outlet (110V-240V). The bidet enters standby mode. To turn off: long-press the side knob for 3 seconds.
Function 1: Automatic Lid
The built-in radar sensor opens the lid automatically when you approach.
Enable/Disable: Press and hold the Auto-Lid button on the remote. One beep = OFF · Two beeps = ON
Function 2: Voice Control
Say “Hello Toilet” to activate, then:
- “Open the lid” → Lid opens
- “Open the seat” → Seat opens
- “Open the bubble” → Bubble activates
Function 3: Knob Quick Access
Rotate clockwise (after sitting) → Hip Wash
Rotate counter-clockwise → Feminine Wash
Short press knob front → Dryer on/off
Long press knob → Power off
Function 4: Remote Control
Pairing
Power on the bidet → Turn and hold the knob clockwise → Press any remote button → A long beep means pairing is successful.
Button Functions
| Button | Function |
|---|---|
| STOP | Stop all operations |
| Power On/Off | Toggle power |
| Hip | Posterior wash (press again to oscillate) |
| Female | Feminine wash (press again to oscillate) |
| Dryer | Warm air dryer (auto-stop 3 min) |
| One-Touch Clean | Full cycle: Hip → Dryer → Stop |
| Nozzle Position | Adjust nozzle position |
| Water Pressure + / – | Adjust pressure |
| Lid Open / Close | Manual lid |
| Seat Open / Close | Manual seat |
| Bubble | Toggle foam function |
| Light | Night light toggle |
| Self-Cleaning | Clean nozzle |
| Auto-Lid (hold) | Enable/disable radar sensor |
Self-Cleaning
The nozzle self-cleans before and after each use. Press Self-Cleaning for an extra cycle.